NRC Science 101 – Quantities and Units of Measure

NRC Science 101 – Quantities and Units of Measure

6 Comments Posted by Moderator on January 27, 2014

Suzanne Schroer

Reliability and Risk Analyst

 

In the last Science 101 blog post, we discussed measurements made in various units of measure, particularly meters, grams and liters. You might be wondering where these units of measure come from and how they relate to one another. If so, you’re in luck, as that is the topic for today’s post.
Quantities are characteristics or properties we are trying to measure, such as the length of an object. Units of measure are how we express measurements of quantities. For length, the unit we would use in science is meters. A unit is really only a particular amount of some quantity used as a reference point for measurements of that quantity. Put differently, units of measure are chosen and accepted by the people who use them.
Often, units of measure were agreed upon many years ago. One meter is as long as it is because that’s what scientists agreed to use as a base unit for length. A meter could have been some other length. For the sake of establishing well-defined and easily-accessible units of measure, the General Conference of Weights and Measures (a collection of scientists from multiple countries) created in 1960 the Sytème International d’Unités (otherwise known as the SI¬). This system relies upon the base units of measure listed in the following table.

Often times, however, the base unit of measure can be either too large or too small to be useful in describing a particular measurement. For example, while we could talk about the distances between cities in meters, we would be using very large (and, as such, cumbersome) numbers. For example, from Portland, Maine, to St. Louis, Missouri, is 2,060,000 m or 2,060 km. Similarly, if we are talking about the size of atoms, the basic building blocks of matter, speaking in terms of meters would be difficult as the diameter of a hydrogen atom is only 0.000000000120m. So, instead, for the sake of convenience, we often use prefixes to modify the size of the base unit. The following table lists a number of such prefixes using meter for the base.

The above table lays out conversion factors, ratios that can be used to convert one unit to another. For example, one such ratio, expressing the relationship between kilometers and meters, would be 1 km / 1000m. Using this ratio, we can convert 12348m into 12.348km (12348m x 1km / 1000m).
The NRC uses these same ideas when measuring radiation. These measurements will be discussed in an upcoming Science 101 post. As always, thank you for reading the NRC’s Science 101 blog series.