Yesterday, NRC announced it was sending a team of additional inspectors to the
San Onofre Nuclear Generating Station
to more fully understand why steam generator tubes are failing a
pressure test. The tubes were isolated to Unit 3, which was safely
shutdown on Jan. 31 when the tube leak was identified. There was no risk
to the employees, the public, or the environment during the pressure
test and both units are currently powered down.
In
order to understand the situation a little better, think of a steam
generator as a large egg filled with water and thousands of long, thin
metal tubes in a U-shape formation attached at the bottom of the egg.
The steam generator removes heat from the nuclear reactor as the hot
radioactive water that surrounds the fuel rods passes through these
tubes. As the hot water travels through the tubes, the rest of the water
in the egg becomes steam. The steam is transferred to the turbine
building where it forces the turbine to move and creates electricity.
A
steam generator tube failing is a problem because radioactive water
that passed over the nuclear reactor and into the steam generator may
escape into the created steam through a hole in the tube. Then, the
radioactive steam could end up at the turbine and eventually may escape
to the environment.
The
NRC inspectors will take a very comprehensive look at this Unit 3
condition, including looking at the manufacturer’s steam generator
design, construction and shipment to the site located near San Clemente,
California. While other steam generators have shown wear after one
cycle of operation, the level of wear at Unit 3 is more than expected.
Currently,
the plant’s operator is continuing pressure testing and so far seven
tubes have failed. In addition to the resident inspectors, an NRC steam
generator expert is on site and inspecting the ongoing testing. A public
exit meeting will be scheduled in the coming weeks where the team will
share their preliminary results.
Lara Uselding
Public Affairs
Region IV
No comments:
Post a Comment